• General Specifications
• Features
• Video

• Heating Power: 150 kW / 512,000 Btu/h / 129,000 kcal/h
• Airflow: 5000 m³/h
• Total Air Pressure: 770 Pa
• Fan: 1 x Centrifugal
• Motor Power Fan: 2000/1600 W/rpm
• Ductability: : 50m
• Air Outlet Diameter: 1 x 41cm or 2 x 31cm
• Summer Ventilation: Yes
• Remote Thermostat: Analogue or Digital
• Flue Tube: 150 mm
• Electronic Box Protection: IP44
• Fuel Tank Capacity: 150L
• Max Fuel Consumption: 14.31 l/h
• Standard Fuel Consumption: 12.19 l/h
• Rated Current: 14 A
• Power Supply: 220-240/1ph/50 V/Hz
• Weight: 230kg
• Product Size: 2086 x 717 x 1233 mm

• 100% Clean Warm Air: Air is drawn into the heater from the rear by an internal fan. The air is heated as it passes over a heat exchanger. The combustion by-products remain within the heat exchanger and are exhausted out of the top of the unit, and only clean, fume-free warm air is blown out of the front of the heater.
• Ducting Connection: Lengths of ducting can be attached to this heater, in order to direct the clean warm air into the space that you need to heat. This makes it ideal for heating a range of large and enclosed areas safely, such as marquees and tents, workshops, warehouses, areas on construction sites and much more.
• Flue Gas Exhaust: Combustion by-products are exhausted out of the top of the heater. Sections of flue pipe are available separately, allowing you to safely vent exhaust fumes away from the space.
• High Pressure Fan: Capable of pushing clean air over long distances, with an air pressure rating of up to 770Pa and an airflow rate of 5000m³/h.
• Separate Riello Burner: For best possible efficiency, performance, and safety.
• Summer-Winter Switch: Allows the high pressure fan to operate without heating, in order to circulate fresh air for ventilation.
• Tough & Robust Heater: Built to perform in challenging areas, including construction sites, workshops, warehouses, agriculture, events and more.
• Portable Design: Crane hooks allow the heater to be lifted on and off transport easily. Large wheels allow the heater to be wheeled into position and re-positioned when required.
• Thermostat Connectivity: An optional thermostat can be connected to these heaters, allowing you to set a required temperature within the space. The thermostat will switch the heater on and off as required in order to maintain the set temperature. This saves fuel and adds extra convenience.
• Overheat Thermostat: Shuts down the heater automatically if it overheats, to prevent accidents.