A table showing the use of electric generators / model and capacity.

Power during start-up and operation of electrical appliances

For small electrical appliances such as light bulbs, microwave ovens, and toasters, the amount of energy required is determined by the operating power. On the other hand, in the case of electric powered devices such as refrigerators and air conditioners, in addition to the power consumed for operation, additional start-up energy is required. In other words, when some types of equipment are turned on, the power of the starting current increases after being loaded in a very short time. Therefore, when choosing your generator, make the following calculations and choose a model that meets your needs.

* Powers shown here are estimates only. Before using the devices, the actual power should be calculated and checked.
** The starting wattage is only required for the first few seconds of operation. If you want to run multiple things at once, you don't need to add their starting powers, just calculate the highest starting power.

Considerations when choosing a pump

Choosing a pump based on performance and output can save energy and materials. The pump should have the highest efficiency and low cost. Therefore, before choosing a pump, perform a hydraulic calculation of the system and determine the total pressure consumption. Spending depends on need and time.

The purpose of choosing a pump is to determine the design and quantity of the pump. When considering this goal, at least three options should be proposed and the most beneficial should be chosen. The consumption of the pump varies between Qmin and Qmax depending on the user's needs during the day. Therefore, for adjustment, it is necessary that the consumption value does not exceed the operating curve area of the selected pump. If this condition is not met, another pump should be selected.

After selecting the pump, draw the position of the pump units and arrange the connection management scheme of the auxiliary equipment. Then the cost of equipment and installation is calculated. The operating cost of the pump consists of the cost of electricity, depreciation and maintenance costs.

Formula for approximate calculation of pump consumption and thrust:

Note: The above formula is approximate, so please contact a professional design agency.

Description:

K= 3.0-4.0 A simple wooden house or a house with metal walls,
K= 2.0-2.9 House of simple design, single brick wall, simple windows, simple roof, Poor insulation.
K=1.0-1.9 Common construction house with double brick walls, few windows, closed roof, medium insulation.
K= 0.6-0.9 Good quality house, double insulated brick walls, few double glazed vacuum windows, good quality thick cast concrete foundation, excellent roof insulation, Excellent insulation.

Where are forklift used?

There are many types of truckers depending on where they work. Therefore, it is necessary to choose a device that is suitable for your activity and has a high capacity and safe operation.

Outdoor environment

IC (internal combustion) models with a capacity of 1.0 - 24.0 tons are mainly used in outdoor areas. *Battery model can also be used.

Horizontal transport

Both IC and battery models can be used for this type of cargo transportation. The main criteria for choosing a trailer

• towing distance
• floor surface
• the slope is important.

Vertical loading

Sample shipment